| This Henry .450 single-shot is available in a wide variety of calibers ranging from .360 2 1/4 in. Exp. up to 12-bore. There are several receiver sizes, appropriate to caliber. Especially interested in a small-frame .360 and a fixed-frame .400--.500 caliber large-frame model. |
|
The most common Henry take-down pattern. |
| A Dougall double rifle built on the 'Lockfast' patent. Most found will be .450 or .500 but at least one .577 is known along with a few bore-gauge guns. All are most welcome. |
| This photo shows the integral discs on the standing breech and the disc recesses in the barrel set that, along with the side lever actuated cam, close the gun very tightly. |
| Hammerless Henry double rifles, such as this under-lever .400, are of particular interest. These will have a distinctive lock plate with a cocking indicator and usually the word 'Cocked' in gold. These appear on both top-lever snap-action or Jones under-lever patterns and calibers from .360--.577. Any are welcome. |
| While Mannlicher rifles appear often with scopes in traditional Continental claw mounts, the factory probably used the Springer type early on. Looking for this carbine in the M1903 model with the 17.7 in. barrel. |
| The Springer scope mount with have a couple of pinch pads on the front mount and a strap rear mount which engage a cleated base on the front receiver ring and a screw on the left side of the rear ring. |
Rook Rifles
| Looking for high quality rook rifles such as this Lancaster side-lock and Henry side-lever hammerless, both .250s. Interested in any maker and also in side-lock hammer versions. All calibers wanted, especially .250, .300 and .360 #5; prefer shootable bores but will consider any. Also interested in small-bore stalking rifles by most any maker in .300 Sherwood, .360 2 1/4 in., etc. |
Lee Speed Sporting Rifles
| B.S.A. or any other maker of interest. Looking especially for guns with matte ribbed barrels, tang safeties and better grades with fancier wood,checkering, cheek pieces, engraving. etc. Most will be .303s but am also very interested in .375 2 1/2 in. rifles. Prefer excellent plus bores but will consider any. |
Lee Speed Rib and Sight Detail
| Shown is the typical rolled matte rib and express/long-range combination rear sight. |