|
SMITH & WESSON SERVICESNo. SW01 Simple Caliber Conversion Available for most S&W revolvers though, by far, the most popular subject is the Heavy Duty N-frame fixed-sight model. Includes reboring, re-rifling, recrowning and remarking the barrel, rechambering the cylinder and a dip blue of the whole gun. Calibers include .38-40, .44-40, .44 Special and .45 Colt. J and K-frame guns are suited to a variety of small-bore caliber conversions but may require the installation of barrels and cylinders. J-frame calibers include the .22 Long Snapper and the .25 Flea; K-frame chamberings include the .25-20, .256 Win. Mag. and the .32-20. Please inquire for details. No. SW01 from $595
OPTIONSPlease note: These options are not available separately except where noted with an asterisk (*). No. SW100 Action/trigger tune Action smoothed and adjusted with trigger pull weight set at about 3-3 ½ lbs. No. SW01 $150 No. SW101 Set timing Carry up timing adjusted to proper specs (service depended on gun condition). No. SW101 $95 plus parts, if req’d. No. SW102 Straighten ejector rod Bent ejector rods straightened to provide smooth action cycling. No. SW102 $30 No. SW210 Set endfloat and headspace Set to factory specs for proper ignition No. SW210 $50 No. SW220 Set barrel-to-cylinder gap Set to .004--.006. May be necessary to set endfloat/headspace first for best results. Includes recutting the forcing cone. Same procedure as installing a barrel. No. SW220 $95 No. SW240 Pin-in front sight conversion Most fixed-sight revolver caliber conversions will require a taller front sight. A pocket is machined in the original sight base to accommodate a taller blade which is pinned in place. No. SW240 $150 No. SW250 Sight regulation (windage only) Range testing for and targeting for adjustable sight guns. No. SW250 $65 No. SW251 Sight regulation for windage and elevation Range testing and targeting for fixed-sight guns. No. SW251 $95 No. SW260 Serrate front sight blade 80 line per inch serrations minimize glare No. SW260 $25 No. SW300 Shorten factory barrel Barrel cut and crowned in the factory style with and fitted with a Weigand sight base with hand-detachable factory-style sight blades. Available only for heavy, target-style barrels. No. SW300 $325 No. SW430 Black powder style cylinder chamfer Graceful, vintage-style chamfer applied No. SW430 $65 No. SW450 Color case hammers and triggers Revives faded coloring on hammers and triggers. No. SW450 $50 ea. Part
|
