Miscellaneous Parts
Extra Sight Blades for Rough Country Sights
Please Note: The standard blade height for Ruger revolvers is .350ʺ, and the standard blade height for Smith & Wesson revolvers is .370ʺ
RCPB35Rough Country .350 Square notch/White-outline Blade (only) $45.95
RCPB37Rough Country .370 tall Square notch/White-outline Blade (only) $45.95
RCPB38Rough Country .385 tall Square notch/White-outline Blade (only) $45.95
RCPB40Rough Country .400 tall Square notch/White-outline Blade (only) $45.95
RCBTRough-Country Standard HeightTarget-style Blade (only) $39.95
RCPB37TRough Country .370 tall Target-style Blade (only) $39.95
RCPB38TRough Country .385 tall Target-style Blade (only) $39.95
RCPB40TRough Country .400 tall Target-style Blade (only) $39.95
RCPBVRough Country V-notch/White-post Blade (only) $45.95
RCPBV38Rough Country .385 Tall V-notch/White-post Blade (only) $45.95
RCPBBRough Country Blade Blank (only) $39.95
For all Rough Country sight models, this blank, unshaped blade can be easily machined into nearly any blade imaginable. It is tall enough for making apertures and thick enough for most tritium bar installations. Installs and interchanges as do all the other Rough Country blades. When available blades just don't quite work for a specific application, this is our 'go to' blade.
Ruger Single-Action Extra-Length Firing Pins
Extra-length firing pin, made from heat-treated stainless steel, afford improved ignition for increased accuracy and dependability of both competition and hunting revolvers.
Requires gunsmith installation
Colt Recoil Plate
Damaged recoil plates with burred or enlarged firing pin holes must be replaced to prevent primer flow that can interfere with proper action cycling. Designed for 2nd and 3rd generation Colt SAA and New Frontier revolvers but is also suited for use with small-diameter firing pin conversions in vintage guns. Requires gunsmith installation
P101$13.95
REDHAWK EXTRA-LENGTH FIRING PIN
Extra-length firing pin, made from heat-treated stainless steel, afford improved ignition for increased accuracy and dependability of both competition and hunting revolvers. For more information please consult the Ruger Redhawk Ignition Problems article in our news section.
Requires gunsmith installation
HEAVY-DUTY MAINSPRINGS FOR STANDARD REDHAWKS
Kit consists of 30 lb. (yellow marked) and 40 lb. (red marked) heavy -duty mainsprings for increased ignition power. Includes installation instructions. For more information please consult the Ruger Redhawk Ignition Problems article in our news section.
P111$19.95
Oversized Locking Base Pins
Oversize hardened and ground base pins tightens cylinder-to-receiver fit and prevents the pin from jumping forward under heavy recoil. The knurled head provides extra grip for ease of removal while the headed lock screw (included) eliminates cylinder cramping. Available for both medium and large-frame New Model Ruger revolvers. Also available in both blue and stainless.
Please note: The .250 diameter pins are suited to unaltered factory guns and will function with minimal, if any fitting. The .257 diameter pins are used in line-bored guns with line-reamed the receiver base-pin holes. They are also suitable where factory cylinder or receiver holes are grossly oversize and clearances not adequately tightened by .250 pin. Both receiver and cylinder base pin holes will have to be reamed .257 to accept these base pin.
P200Large Frame - .250ʺ x 2.875ʺ (Blue) $39.95
P201Large Frame - .250ʺ x 2.875ʺ (Stainless) $39.95
P202Large Frame - .257ʺ x 2.875ʺ (Blue) $39.95
P203Large Frame - .257ʺ x 2.875ʺ (Stainless) $39.95
P204Medium Frame - .250ʺ x 2.745ʺ (Blue) $39.95
P205Medium Frame - .250ʺ x 2.745ʺ (Stainless) $39.95
P206Medium Frame - .257ʺ x 2.745ʺ (Blue) $39.95
P207Medium Frame - .257ʺ x 2.745ʺ (Stainless) $39.95
Please note that installation requires that a small recess be milled into the barrel for the lock screw making this a job for a gunsmith or skilled machinist.
Ruger Endfloat Bushing
Installation elminates endfloat and allow precise setting of headspace in all Ruger single-action revolvers. Made from heat-treated chromoly steel with blued finish.
Requires gunsmith installation
P312$17.95; package of three
Colt Endfloat Bushing
Designed for 3rd Generation Colt SAA and New Frontier models, installation eliminates endfloat and allows precise setting of head-space. Bushings are much longer than factory replacement parts with adequate material for proper fitting. Made from heat-treated chromoly steel with blued finish
Requires gunsmith installation
P313$17.95; package of three